The SE210/250TC thruster is specially built to give a maximum thrust in a minimum diameter. It is the perfect choice for sailboats or as an upgrade thruster model for boats were the SE170/250TC is standard so that you can use the boat’s "standard" tunnel size. The SE210/250TC will also be the most powerful choice for older boats with a 250 mm tunnel and a thruster which is to small from the time when these powerful DC thrusters were not available.
The SE210/250TC includes all the important and unique Side-Power features and qualities - why settle for less
THRUSTER DATA
Thrust at 21V* (kg · lbs)
210 · 462
Thrust at 24V* (kg · lbs)
250 · 550
Typical boat size (ft · m)
55 - 78 · 17 - 24
Tunnel I.D. (mm · in)
250 · 9.8
Propulsion system
Twin counter rotating
Power at 21V* (kw · Hp)
10 · 13.2
For DC system (V)
24
Weight (kg · lbs)
68 · 150
Min. Batt. Cap (CCA 24V)
650
Item Code 24V
SE210/250TC
Measurements
A (mm · in)
250 · 9.84
B (mm · in)
478 · 18.8
C (mm · in)
260 · 10.2
D (mm · in)
281 · 11.1
E min (mm · in)
250 · 9.8
F (mm · in)
300 · 11.8
F recommended (mm · in)
600 · 23.6
G min. (mm · in)
7 · 0.28
G max. (mm · in)
13 · 0.51
STERN THRUSTER KIT
Measurements
I (mm · in)
420 · 16.5
II (mm · in)
360 · 14.2
III min. (mm · in)
300 · 11.8
IV max. (mm · in)
50 · 1.97
V (mm · in)
200 · 7.87
VI (mm · in)
350 · 13.87
Tunnel length (mm · in)
350 · 13.87
Item code
Stern thruster kit
90140i/90150i
Cowls - short model
90132
Sleipner Motor AS · Arne Svendsensgt. 6-8 · Postboks 519 · 1612 FREDRIKSTAD · side-power@sleipner.no · 69 30 00 60